11
Fix the rear edge retainer with the blue screw using a coin, screwdriver or something similar .
Fix the screws by turning them in the clockwise direction.
There are two screw holes for fastening the rear edge retainer. Make sure that it is fastened properly (aligned with the marks for the
desired paper size) to prevent it from being installed at an angle.
12
Remove the two blue screws on the inner size change plate using a coin, screwdriver or something
similar .
13
Remove the inner size change plate .
Hot air that is blown by the fan may warm the inner size change plate.
1
1-21
Paper Drawers