Canon C9075 PRO Operating Manual page 41

Do not subject the paper holder plate to shock when loading paper into the paper deck, as this may result in a malfunction or damage
to the machine.
•
Paper which has been rolled or curled must be straightened out before loading it into the paper deck.
•
Make sure that the height of the paper stack does not exceed the loading limit mark (
•
If there are instructions on the package of paper about which side of the paper to load, follow those instructions.
•
When paper is loaded, the side facing up is the one printed on.
•
If problems occur, such as poor print quality or paper jams, try turning the paper stack over, and reload it. However, textured paper,
single-sided coated paper, and paper already printed on cannot be turned over. Change to new paper.
•
When loading paper, make sure that the height of the paper stack does not exceed 13/16" (20 mm). If the height of the paper stack
exceeds 13/16" (20 mm), the edges of the paper stack may become curled or creased, and poor print quality may result.
5
Gently push the paper deck back into the machine until it clicks into place in the closed position .
The inside lifter automatically rises, and prepares the paper deck for printing.
When returning the paper deck to its original position, be careful not to get your fingers caught, as this may result in
personal injury
You will not be able to make copies or print if you load paper that exceeds the loading limit, or if the paper deck is not completely
pushed into the machine.
If paper runs out during copying or printing, load new paper stack, and follow the instructions on the touch panel display. The machine
automatically restarts, and produces the remaining copies or prints.
) on the inside of the paper deck.
Multi-drawer Paper Deck-A1 (Optional)
1
1-29