Fisher & Paykel CI604DT Installation Instructions And User Manual page 25

Using the timer as a minute minder
Make sure the cooktop is turned ON.
1
Note: you can use the minute minder
even if you're not using any cooking
zones.
Set the time while the small red light in the
3
bottom corner of the minute display is on.
Hint: the minutes will scroll faster if you
–
touch and hold
If you are not using any cooking zones
You can use the timer as a minute minder even if you are not using any cooking zones. In this
case, the cooktop will turn itself off 10 seconds after you have set the time, but the time will
continue to count down. To change or cancel the minute minder setting, you will have to turn
the cooktop back on first. See 'To change or cancel a timer setting' .
When the set time is up
00 will flash and the timer will beep. Touch any control to stop the beeping.
Remember, touching the ON/OFF control will turn the whole cooktop off!
Using your cooktop's special features
+
or continuously.
–
Touch the and
2
together. The minute minder indicator
will start flashing and 00 will show in the
minute display.
When the time is set, it will begin to count
4
down immediately. The display will show
the remaining time and the minute minder
indicator will keep flashing.
+
controls of the timer
23