Using Your Induction Cooktop - Fisher & Paykel CI604DT Installation Instructions And User Manual

To start cooking
Touch and hold the ON/OFF
1
control for 2 seconds.
Place a suitable pan on the
3
cooking zone you wish to use.
Make sure the bottom of the pan
and the surface of the cooking
zone are clean and dry.
If a display flashes
This means that:
you have not placed a pan on the correct cooking zone or
the pan you're using is not suitable for induction cooking or
the pan is too small or not properly centred on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The cooktop will automatically turn off after 10 minutes if no suitable pan is placed on it.

Using your induction cooktop

0 will appear in the cooking zone displays.
2
Select a heat setting by touching
4
If you don't choose a heat setting within 10
seconds, the cooktop will automatically
turn off. Start with step 1 again.
You can modify the heat setting at any time
during cooking.
alternately with the heat setting
15
– +
or .