Installation instructions
10
Applying the supplied foam seal
Turn the cooktop upside down and place it carefully on a soft surface.
1
Important!
To avoid damage to the glass, ensure there is a protective cover underneath it.
Apply the foam seal around the glass overhang, 5 mm in from the edge of the glass.
2
Turn the cooktop the right way up and place it into the cutout.
3
Clamping down the cooktop
Depending on the thickness of the benchtop, secure the supplied clamping brackets as shown.
x 4
x 4
48-65 mm
Important!
Do not overtighten the screws!
30-48 mm
Important!
Do not overtighten the screws!