JVC GY-HD110 Instructions Manual page 32

CONTROLS, INDICATORS AND CONNECTORS
Indications on the LCD Monitor and in the Viewfinder (Cont'd)
DISPLAY button
Inverted LCD
28
Normal LCD
LCD open 40° or
more
LCD close less
than 40°
When not using an Anton Bauer battery or IDX battery, or
when using these batteries and the LCD+VF item in the LCD/
VF [3/3] menu is set to OFF, the LCD monitor and viewfinder
(VF) displays are as shown below.
LCD Monitor Status
LCD Closed Normal LCD
Inverted LCD
LCD Open Normal LCD
Inverted LCD
When using an Anton Bauer battery or IDX battery and the
LCD+VF item in the LCD/VF [3/3] menu is set to ON, the LCD
monitor and viewfinder (VF) displays are as shown below.
LCD Monitor Status
LCD Closed Normal LCD
Inverted LCD
LCD Open Normal LCD
Inverted LCD
MEMO
• You can switch between the LCD monitor and the view-
finder by holding down the DISPLAY button for about 2
seconds.
• After you set up the function that switches the display
between the LCD monitor and the viewfinder by holding
down the DISPLAY button, the display mode is cancelled
by the LCD monitor open/close and normal/inverted oper-
ations.
• If the LCD monitor is closed inside the camcorder with the
screen in the normal display orientation, holding down the
DISPLAY button does not work.
• You can set the LCD monitor and viewfinder to display
simultaneously by selecting the VF+LCD item in the LCD/
VF [3/3] menu display.
(Only when this unit is being operated with an Anton
Bauer battery or IDX battery)
X See page 76.
LCD Display VF Display
OFF ON
ON OFF
ON OFF
ON OFF
LCD Display VF Display
OFF ON
ON ON
ON ON
ON ON