Advanced Bios Features - JETWAY 865GDM User Manual

The time format is <hour><minute><second>.
Primary Master/Primary Slave
Secondary Master/Secondary Slave
Press PgUp/<+> or PgDn/<–> to select Manual, None, Auto type. Note that the specifications of
your drive must match with the drive table. The hard disk will not work properly if you enter
improper information for this category. If your hard disk drive type is not matched or listed, you
can use Manual to define your own drive type manually.
If you select Manual, related information is asked to be entered to the following items. Enter the
information directly from the keyboard.
documentation from your hard disk vendor or the system manufacturer.
If the controller of HDD interface is SCSI, the selection shall be "None".
If the controller of HDD interface is CD-ROM, the selection shall be "None"
Access Mode The settings are Auto Normal, Large, and LBA.
Cylinder number of cylinders
Head number of heads
Precomp write precomp
Landing Zone landing zone
Sector number of sectors

3-5 Advanced BIOS Features

CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
Anti-Virus Protection
Cooling Sprite
CPU L1 & L2 Cache
Hyper Threading Technology
Quick Power On Self Test
HDD Boot Sprite
Hard Disk Boot Priority
First Boot Device
Second Boot Device
Third Boot Device
Boot other Device
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 Option
Typematic Rate Setting
Typematic Rate (Chars/Sec)
Typematic Delay (Msec)
Security Option
APIC Mode
MPS Version Control For OS
OS Select For DRAM > 64MB
Report NO FDD For Windows
Intel OSB Logo Show
↑ ↓ → ←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Anti-Virus Protection
This information should be provided in the
Advanced BIOS Features
Disabled
Disabled
Enabled
Disabled
Enabled
Disabled
Press Enter
Floppy
HDD 0
CDROM
Enabled
Disabled
Enabled
On
Fast
Disabled
6
250
Setup
Disabled
1.4
Non-OS2
Yes
Disabled
F6:Optimized Defaults
21
Item Help
Menu Level >
F1:General Help
F7:Standard Defaults