Ariens Hydro Pro Track 32 Manual page 37

PROBLEM
Unit throws
snow poorly or
does not throw
snow.
TROUBLESHOOTING
PROBABLE CAUSE
1. Shear bolts broken.
2. Attachment clutch/brake
not adjusted properly.
3. Impeller is frozen in place.
4. Ice or debris is obstructing
auger.
5. Attachment drive belts
slipping, worn or damaged.
CORRECTION
1. Replace shear bolts (see Shear
Bolts on page 27).
2. Adjust attachment clutch/brake
(see Attachment Clutch/Brake
Adjustment on page 29).
3. Move unit to a warm place to
thaw.
4. With the engine off and auger
disengaged, check for
obstructions and remove.
5. Adjust or replace attachment
drive belts. (To adjust, see
Attachment Clutch/Brake
Adjustment on page 29. To
replace, see Attachment Drive
Belts Replacement on page 31.)
EN - 37