6. Click Next and the window shown in
Figure 3-5 will appear.
CAUTION
In order to create a GTN Software Loader
Card, the drive that you select will be
completely erased.
7. Ensure that the correct drive is selected. Click
Next to create the card. Click Next to
acknowledge any warnings that appear. The
progress window in Figure 3-6 will appear
when the card is being created.
8. After the card has been created, the window
shown in Figure 3-7 will appear. Click Finish
to complete the update process.
9. Eject the card from the card reader (or stop
the card reader in Windows). The GTN
Software Loader Card is now ready to use.
190-01007-B1
Rev. 1
Figure 3-5. GTN Software Loader Card
Figure 3-6. Update Progress Window
Figure 3-7. Update Completion
GTN 6XX/7XX Part 27 AML STC Maintenance Manual
Formatting
Page 3-3