Interrupting The Alarm - Grundig Music Boy 51 RP 5201 PLL User Manual

2 4 I : 9
5 : 0
5
6 : 0
2
6 : 1
2
6 : 1
2
I 00 6 .
M
e
MHz FM
20
OPERATION
Set the alarm volume using »
4
Press »ON/OFF« to switch off the device.
5
6 Press »ALARM« to select the alarm function.
– Display: the current time and »
Briefly press »MODE« to check the alarm time.
7
– Display: the set alarm time, »
– After a short time, the display changes to the current time, »
longer flashes.
– The radio switches on at the set alarm time.
Briefly displaying the alarm time
With the device switched off, press »MODE«.
1
– The display changes from the clock to the set alarm time, – display:
»e« or »
– After a short time, the display changes back to the current time.

Interrupting the alarm

Press »SNOOZE« while the alarm is sounding.
1
– Display: »e« or »
– The alarm (signal tone or radio) stops.
– The alarm goes on again at 5-minute intervals (the total alarm time is
90 minutes).
Cancelling the alarm for the day
Press »ON/OFF« while the alarm is sounding.
1
– Display: the current time and »e« or »
– The alarm (signal tone or radio) stops, but the alarm function remains
activated for the next day at the set time.
Cancelling alarm stand-by
Press »ALARM« to cancel alarm stand-by.
1
– Display: »e« or »
– The set alarm time is saved.
4
2 Press »ALARM« to re-activate alarm stand-by.
– Display: »e« or »
_______________________________________________
+ VOL
–«.
«.
« flashes.
« flash.
« flash.
« disappears.
«.
« no
«.