Timer Mode; Setting The Alarm Times; Cancelling Alarm Stand-By; Activating And Deactivating Alarm - Grundig Music 51 DAB+ User Manual

TIMER MODE

Note:
The alarm function is only available during
7
mains operation, it is disabled during battery
use.

Setting the alarm times

1 Press »ON/OFF« to switch on the device.
– Display: e.g. »B5 AKT«.
2
Open the menu with »MENU«.
3 Select the option »SYSTEM« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
4 Select the option »ALARM« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
– Display: »ALARM« flash.
5
Press »SELECT/i«, select Timer On (»ON«)
»– TUNING
by pressing
pressing »SELECT/i«.
– Display: e.g. »6 : 00 AM«.
6 Set the hours by pressing
confirm by pressing »SELECT/i«.
7
Set the minutes by pressing
and confirm by pressing »SELECT/i«.
8
Set the clock format (12 or 24 hours) by
»– TUNING
pressing
pressing »SELECT/i«.
9 Select the desired alarm day (Daily, Once,
Weekends or Weekdays) by pressing
»– TUNING +«.
Notes:
If the alarm is set to „Once" continue with
7
step 10.
Otherwise, end settings with step 13.
7
10
Set the day by pressing
confirm by pressing »SELECT/i«.
11 Set the month by pressing
and confirm by pressing »SELECT/i«.
12
Set the year by pressing
13
Press »SELECT/i« to end the setting.
– Display: »SAVED«.
--------------------------------------------------------------------------------------------------------------------------
+« and confirm by
»– TUNING +« and
»– TUNING +«
+« and confirm by
»– TUNING +« and
»– TUNING +«
»– TUNING +«.
Alarm with signal tone
1
Set the alarm signal tone (»e«) using
»BUZZER/RADIO« to position »BUZZER«.
– Display: »e«.
– The alarm goes on with a signal tone at the
set time.
Alarm with radio station
1 Select the radio alarm (»
»BUZZER/RADIO« to position »RADIO«.
§
– Display: » «.
– The radio switches on to the last listened radio
station at the set alarm time
Interrupting the alarm
1
Press »S« while the alarm is sounding.
– Display: »e« or »
– The alarm (signal tone or radio) stops.
– The alarm goes on again in 5-minute intervals
(the total alarm time is 90 minutes).

Cancelling alarm stand-by

1
Press »ON/OFF« while the alarm is sounding.
– Display: the current time and »e« or »
– The alarm (signal tone or radio) stops, but
the alarm function remains activated for the
next day at the same time.
Activating and deactivating the
alarm
1
Press »ON/OFF« to switch off the device.
2 Press »AL/ATS« to deactivate the alarm stand-
by.
– Display: »OFF« and »e« or »
disappears.
– The set alarm time is saved
3
Press »AL/ATS« to reactivate the alarm stand-
by.
– Display: »ON« and »e« or »
§
«) using
§
« flash.
§
§
«
§
«.
ENGLISH
23
«.