Setting Up Your Audio Device - Creative Sound Blaster Recon3D Omega Wireless User Manual

Setting Up Your Audio Device

Step 1: Insert the wireless card into the audio device
M I
C
NOTE
• Insert the wireless card before powering up the audio device. Do not
insert or remove the wireless card while the audio device is on.
• Your headset and wireless transmitter are paired together and are
ready to use. The Connect LED on the audio device and headset will
light up blue. If you wish to pair them manually, refer to Using the
Wireless Features.
• While the wireless headset is turned on, audio will be played back
through the headset instead of the headphone jack on the audio device.
M I
C