Printing A Test Page - Brother HL-4070CDW Quick Setup Manual

3
Fan the stack of paper well to avoid paper jams
and misfeeds.
4
Put paper in the paper tray. Make sure that the
paper is flat in the tray and below the maximum
paper mark.
5
Put the paper tray firmly back into the printer.
Make sure that it is completely inserted into the
printer.
5

Printing a test page

Improper Setup
DO NOT connect the interface cable yet.
Setting Up the Machine
1
Lift the LCD display and adjust it for the best
viewing angle.
2
Unfold the support flap.
3
Make sure that the printer power switch is off.
Remove the label covering the AC power inlet.
4
Connect the AC power cord to the printer.
13