Printing A Test Sample Page - Brother HL-1060 Series Quick Setup Manual

English: HL-1060 Quick Setup Guide, Body

Printing a Test Sample Page

We recommend that you print a test page. Refer to the instructions below.
NOTE
The following first-print test page operation will be invalid after the printer receives any
data from your computer.
Additional test sample pages can be printed by using the "Test Print Mode" procedure in
Chapter 3 of the User's Guide.
NOTE
If the printer does not print a test sample page, see "CHAPTER 6 TROUBLESHOOTING,
Q & A" of the User's Guide. If you are still unable to print a test sample page after reviewing
the information in the User's Guide, consult your dealer.
After printing the test sample page, you are ready to prepare your computer to work with the
printer. The software setup varies depending upon your computer and operating system. Refer
to the section relevant to your needs:
Action 6-1: Prepare Windows 95 for the Printer
Action 6-2: Prepare Windows 3.1 for the Printer
Action 6-3: Prepare DOS for the Printer
Action 6-4: Prepare Macintosh for the Printer
10
Press the control panel switch.
The printer will start printing a test sample
page.
NOTE
The printer can also print settings, fonts,
and hexadecimal values of received data.
For more information, see "Test Print
Mode" in Chapter 3 of the User's Guide.