Printing A Test Page - Brother HL-2140 Quick Setup Manual

STEP 1
Setting Up the Machine
3

Printing a test page

Improper Setup
DO NOT connect the interface cable yet.
1
Make sure that the printer power switch is off.
Connect the AC power cord to the printer.
2
Plug the AC power cord into an AC power
outlet. Turn on the printer power switch.
3
Unfold support flap 1.
12
4
After the printer has finished warming up, the
Ready LED / Go button (1) stops blinking and
stays blue.
1
5
Press the Go button. The printer prints a test
page. Check that the test page has printed
correctly.
Note
This function will not be available after the first
print job you send from your computer.