Invacare BAR600IVC User Manual page 13

WARNING
NEVER operate the unit if the cords are damaged.
If the unit is not working properly, call a qualified technician to examine the unit and repair it.
Keep all moving parts, including the main frame, mattress deck (head and foot springs/sections) and all drive shafts, free of
obstruction (i.e. blankets/sheets, heating blankets/pads, tubing, wiring, etc. and other types of products using electric cords
which may get tangled around the bed, side rails or legs) during operation of the electric bed.
The electric bed is equipped with locking casters. When transferring into or out of the electric bed, ALWAYS lock the
locking caster(s). Inspect the wheel locks for correct locking action before actual use. Even with casters properly locked,
some flooring surfaces such as tile or wood, will allow the bed to move under some conditions. Use on surfaces such as
these must be evaluated by the care provider.
Entrapment Warning
WARNING
Refer to the Bed Rail Entrapment Risk Notification Guide at www.invacare.com for additional safety information.
Mattress MUST fit bed frame and bed rails snugly to reduce the risk of entrapment.
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely.
Part No 1123842
13
Invacare
® ™
IVC Model BAR600IVC Bariatric Bed
3 SAFETY