[Event] Function For Events - Panasonic WJ-HD309 Operating Instructions Manual

■ [Event] Function for Events

Perform the settings for event actions of each event type
(motion detection, video loss, command alarm and terminal
alarm).
SETUP MENU
Maintenance Recording
Switcher Display
■
VMD
Event Setup
■
Video Loss
VMD Setup
■
Terminal/Command Alarm
Alarm Setup
Terminal Setup
q
[Event Setup] Settings for the alarm output
duration and the buzzer duration
Perform the settings for the alarm output duration and
the buzzer sound duration for each event type (motion
detection, video loss, command alarm and terminal
alarm).
SETUP MENU
Maintenance Recording
Switcher Display
■
VMD
Event Setup
■
Video Loss
VMD Setup
■
Terminal/Command Alarm
Alarm Setup
Terminal Setup
SETUP MENU
Maintenance Recording
Switcher Display
■
Event Setup VMD
■
Video Loss Setup
VMD Setup
■
Terminal/Command Alarm Setup
Alarm Setup
■
Alarm Output
■
Terminal Setup Buzzer
The following are available for the alarm output dura-
tion.
When OFF is selected, the alarm output will not be sup-
plied.
(s: second, m: minute)
OFF: No alarm output is supplied.
1 s - 30 s (in 1 second intervals)
/40 s/50 s/1 m/2 m/3 m/4 m/5 m
EXT: Alarm output will continue until the ALARM RESET
button is pressed.
Important:
The alarm output duration cannot be set for video loss.
Signals will be supplied continuously from the camera
error output terminal (pin no. 17) of the ALARM/CON-
TROL connector on the rear panel during the period
when the video signal is lost. (Refer to page 82.)
Event Schedule
LIVE
Comm System
SETUP
SETUP
SETUP
Event Schedule
LIVE
Comm System
SETUP
SETUP
SETUP
Event Schedule
LIVE
Comm System
SETUP
SETUP
SETUP
1 0 s
1 0 s
O K CANCEL
The following are available for the buzzer sound dura-
tion.
When OFF is selected, a buzzer will not sound.
(s: second, m: minute)
OFF: The buzzer will not sound.
1 s - 30 s (in 1 second intervals)
/40 s/50 s/1 m/2 m/3 m/4 m/5 m
EXT: The buzzer will continue until the ALARM RESET
button is pressed.
w
[VMD Setup] Perform the settings for the
motion detection function
Select ON or OFF to determine whether to enable or
disable the motion detection function for each camera
channel.
When ON is selected, perform the settings for the auto
motion detection area for each camera channel. Up to 4
areas can be set for a camera channel for the detection
area. Refer to page 45 for further information about the
auto motion detection function.
SETUP MENU
Maintenance Recording
Switcher Display
■
CAM1
Event Setup
■
CAM2
VMD Setup
■
CAM3
■
Alarm Setup CAM4
■
CAM5
Terminal Setup
■
CAM6
■
CAM7
■
CAM8
■
CAM9
■
CAM10
■
CAM11
■
CAM12
■
CAM13
■
CAM14
■
CAM15
■
CAM16
[Screenshot 1]
Start operation from the camera channel selection menu of
the "VMD Setup" window.
SETUP MENU
Maintenance Recording
Switcher Display
■
CAM1
Event Setup
■
CAM2
VMD Setup ■
CAM3
■
Alarm Setup CAM4
■
CAM5
Terminal Setup
■
CAM6
■
CAM7
■
CAM8
■
CAM9
■
CAM10
■
CAM11
■
CAM12
■
CAM13
■
CAM14
■
CAM15
■
CAM16
Event Schedule
LIVE
Comm System
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Event Schedule
LIVE
Comm System
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
99