[Display] - Panasonic WJ-HD309 Operating Instructions Manual

■ [Display]

Perform the display settings for monitors 1 and 2 connected
to the unit.
SETUP MENU
OSD Setup
Monitor 1
Monitor 2
q
OSD Setup
Perform the On Screen Display settings for monitor 1
and monitor 2 such as the settings of camera titles or
the settings of the time display position.
SETUP MENU
OSD Setup
Monitor 1
Monitor 2
● Camera Title
Perform the settings for the camera title. It is possible to
display a camera title on the monitor 1/monitor 2, and
record it as a part of the recorded image. Do the following
to set the camera title.
[Screenshot 1]
Start operation from the "OSD Setup" menu.
SETUP MENU
OSD Setup
Monitor 1
Monitor 2
z Move the cursor to "Camera Title" using the arrows but-
ton (C D) and press the SET button.
112
Maintenance Recording Event Schedule
LIVE
Switcher Display Comm System
■
Camera Title SETUP
■
Time & Date Display Position L-UPPER
■
Camera Title Display Position
R-LOWER
■
Line Color on the Multi Screen
WHITE
Maintenance Recording Event Schedule
LIVE
Switcher Display Comm System
■
Camera Title SETUP
■
Time & Date Display Position L-UPPER
■
Camera Title Display Position
R-LOWER
■
Line Color on the Multi Screen
WHITE
Maintenance Recording Event Schedule
LIVE
Switcher Display Comm System
■
Camera Title
SETUP
■
Time & Date Display Position L-UPPER
■
Camera Title Display Position R-LOWER
■
Line Color on the Multi Screen
WHITE
[Screenshot 2]
The camera title pop-up window will be displayed.
SETUP MENU
Maintenance Recording
Switcher Display
■
Camera Title
OSD Setup
■
Time & Date Display Position
CAM1
Monitor 1
■
Camera Title Display Position
CAM2
■
Monitor 2
Line Color on the Multi Screen
CAM3
CAM4
CAM5
CAM6
CAM7
CAM8
x Move the cursor to "CAM1" using the arrows button.
[Screenshot 3]
The cursor moves to " CAM1".
SETUP MENU
Maintenance Recording
Switcher Display
■
Camera Title
OSD Setup CAM1 CAM1
■
Time & Date Display Position
Monitor 1 CAM2 CAM2
■
Camera Title Display Position
CAM3 ■ CAM3
Monitor 2 Line Color on the Multi Screen
CAM4 CAM4
CAM5 CAM5
CAM6 CAM6
CAM7 CAM7
CAM8 CAM8
c Select a character to be entered by rotating the jog dial.
Up to 16 characters can be entered.
v Move the cursor to the right side of the entered charac-
ter using the arrows button.
Repeat steps 3 and 4 to enter the camera title.
Notes:
• To correct the entered characters, move the cursor
to the character to be corrected and press the
STOP button to delete it. Enter a correct character
after deleting.
• To copy the camera title that has been set for
another camera channel, follow the procedure
below.
1. Move the cursor to "CAM 1" in step 2 on the pre-
vious page and press the SET button. The fol-
lowing screen will be displayed.
SETUP MENU ■
Maintenance Recording
Copy Another Camera Title
CAM1 CAM1
Switcher Display
CAM2 CAM2
■
Camera Title
Common Setup
CAM3 ■ CAM3
Time & Date Display Position
Monitor 1
■
CAM4 CAM4 O K
Camera Title Display Position
■
Monitor 2 Line Color on the Multi Screen
CAM5 CAM5
CAM6 CAM6
CAM7 CAM7
CAM8 CAM8
2. Select the camera channel for which the cam-
era title is to be copied by rotating the jog dial.
Event Schedule
LIVE
Comm System
SETUP
L-UPPER
R-LOWER
WHITE
OK CANCEL
Event Schedule
LIVE
Comm System
SETUP
L-UPPER
R-LOWER
WHITE
OK CANCEL
Event Schedule
CAM2
LIVE
Comm System
SETUP
L-UPPER
CANCEL
R-LOWER
WHITE
OK CANCEL