Weider Flex 8960 User Manual page 11

19. Wrap the Long Cable (80) over a Large Pulley
(28). Attach the Pulley to the Top Frame (9) with
an M10 x 70mm Bolt (64). Do not thread a
Locknut onto the Bolt yet.
20. Thread an M12 Locknut (97) halfway onto the
Weight Tube "U"-bracket (38). Tighten the Weight
Tube "U"-bracket into the Weight Tube (44).
Tighten the M12 Locknut against the Weight Tube.
Wrap the Long Cable (80) under the Small Pulley
(67) in the direction shown. Attach the Pulley to
the Weight Tube "U"-bracket (38) with an M10 x
45mm Bolt (2) and an M10 Nylon Locknut (76).
21. Wrap the Long Cable (80) over a Large Pulley
(28). Attach the Pulley to the Top Frame (9) with
the M10 x 70mm Bolt (64) used in step 19, and
an M10 Nylon Locknut (76).
22. Wrap the Long Cable (80) under a Large Pulley
(28). Attach the Pulley and a pair of Pulley
Covers (29) to the Upright (3) with an M10 x
140mm Bolt (72), an M10 Washer (75), and an
M10 Nylon Locknut (76). Make sure that the
small tabs on the Pulley Covers are in the
indicated position.
19
64
28
80
20
80
76
97
44
21
9
64
28
80
22
76
11
9
67
38
2
76
80
Small
Tab
28
75
29
3
72