Using The Rta - dbx DriveRack 480 User Manual

Section 8

8.5 Using the RTA

DriveRack™ User Manual
78
480R Remote Controller
A built-In Real Time Audio Analyzer is included as just one of the many added features of the
480R DriveRack™. The following information is provided to inform you as to how to utilize
the RTA in the 480R DriveRack
• To connect an RTA microphone to the 480R, simply make the connection to the XLR jack
on the rear panel as shown below.
• Engage the phantom power switch if microphone requires 48V Phantom power.
• LOCAL/NETWORK SELECTION - Always make certain that you are working on either
the Network or the 480R's RTA by selecting LOCAL(1) or NETWORK(2) when you initially
enter Utility mode. Local indicates that you are working within the 480R, while Network indi-
cates that you are through a selected unit on the network system.
• Once the connection of the microphone has been made, simply press the RTA button on the
front panel of the 480R and the display will appear like this:
• Once the desired settings have been made on page 1, press the
NEXT PG button to move to the page 2 and the display will appear
something like this:
DriveRack
®
™