dbx DriveRack 442 Brochure & Specs

442 DriveRack
Complete Equalization Management System
The DriveRack 442 Complete Equalization Management System is the latest product in
®
the DriveRack line. The 442 is based on the same operating system as the DriveRack
®
480 and offers the user four inputs and four outputs on XLR connectors. Each channel
has EQ in the form of a 9-Band Parametric or a 31-Band Graphic and Notch Filters. In
addition the 442 features a filter set that can be used to create a Highpass, Lowpass or
Bandpass filter. Dynamics processing is available on all channels with a
Compressor/Limiter that emulates the classic dbx 160. The output section of the 442
offers delay, output level and phase compensation. The 442 is also capable of running
dual real-time analyzers on channels three and four. A 480 master, a PC GUI, or a 480R
remote can control the 442. Any combination of 480s, 481s, 482s and 442s can be con-
trolled on a single DriveRack
The 442 DriveRack continues the legacy DriveRack series, which has been created
by the company that has been redefining the standard of signal processing for more
®
than 30 years. dbx Professional Products has created a product that caters to
numerous applications in tour sound and sound contractor requirements.
The 442 DriveRack was designed with the purpose and vision of providing four
independent channels of processing power that includes 31-Band Graphic equalizer,
as well as dbx's own industry standard dynamics processing. All aspects of the
aforementioned features can be controlled by the included dbx Professional
Products Interactive DriveWare™ software. Software updates can also be down-
loaded instantly from www.dbxpro.com through the RS 232 port.
• 4 Input and 4 Outputs
• 31 band graphic or 9 band paramet-
ric equalizer on every input
• Time Alignment Delay
• Compressor/Limiter on every output
• Multi-level Security System
• Separate House and Show EQ with
individual lockouts
• Triple redundant back up of all para-
meters when running network, 480R
and GUI
®
® network consisting of up to 100 units.
• TYPE IV™ Conversion System
• Electronically balanced/RF filtered
XLR Inputs and Outputs
• Proprietary RS-485 Control Network
• RS-232 PC Interface for computer dis-
play and configuration
®
8760 S. Sandy Pkwy.
Sandy, Utah 84070
Phone (801) 568-7660
Fax (801) 568-7662
Int'l Fax (801) 568-7583
customer@dbxpro.com
http://www.dbxpro.com
A Harman International Company
18-0014-A 11/01
®