Editing Factory Programs; Saving Factory Program Changes - dbx DriveRack 480 User Manual

Section 3

3.3 Editing Factory Programs

3.4 Saving Factory Programs Changes
DriveRack™ User Manual
24
Configuring the DriveRack™
Once you have reached the module that you wish to edit, simply use the
PREV PG and NEXT PG buttons to move through the pages within the module. The PARA-
METER knobs are used to edit parameter values. The following illustration shows an exam-
ple of the Compressor/Limiter module in edit mode:
Once you are satisfied with the changes that have been made to a factory or user program, the
DriveRack™ allows you to save these changes to the program as a custom USER program by
simply pressing the STORE button and the display will appear something like this:
Rotate the Parameter 2 knob to move the cursor position. Rotate the Parameter 1 knob to
select the desired character. Push the PARAMETER 2 knob to toggle between upper and
lower case characters.
DriveRack
®
™