TP-Link TL-WDR3500 User Manual page 97

Mode - Here are two options, IP Address and Domain Name. You can choose either of them

from the drop-down list.
If the IP Address is selected, you will see the following items:
IP Address - Enter the IP address (or address range) of the target (targets) in dotted-decimal

format (e.g. 192.168.0.23).
Target Port - Specify the port or port range for the target. For some common service ports,

you can make use of the Common Service Port item below.
Protocol - Here are four options, All, TCP, UDP, and ICMP. Select one of them from the

drop-down list for the target.
Common Service Port - Here lists some common service ports. Select one from the

drop-down list, and the corresponding port number will be filled in the Target Port field
automatically. For example, if you select "FTP", "21" will be filled in the Target Port
automatically.
If the Domain Name is selected, you will see the following items:
Domain Name - Here you can enter 4 domain names, either the full name or the keywords

(for example, google). Any domain name with keywords in it (www.google.com,
www.google.cn) will be blocked or allowed.
3. Click Next when finishing creating the access target entry, and the next screen will appear as
shown in Figure 4-84.
Figure 4-84 Quick Setup – Create an Advanced Schedule Entry
Schedule Description - In this field, create a description for the schedule. Note that this

description should be unique (e.g. Schedule_1).
Day - Choose Select Days and select the certain day (days), or choose Everyday.

Time - Select "24 hours", or specify the Start Time and Stop Time yourself.

TL-WDR3500 N600 Wireless Dual Band Router
- 87 -