Dhcp Clients List; Address Reservation - TP-Link TL-WDR3500 User Manual

4.9.2

DHCP Clients List

Choose menu "DHCP → DHCP Clients List", you can view the information about the clients
attached to the Router in the screen as shown in Figure 4-49.
Client Name - The name of the DHCP client

MAC Address - The MAC address of the DHCP client

Assigned IP - The IP address that the Router has allocated to the DHCP client

Lease Time - The time of the DHCP client leased. After the dynamic IP address has expired,

a new dynamic IP address will be automatically assigned to the user.
You cannot change any of the values on this page. To update this page and to show the current
attached devices, click the Refresh button.
4.9.3

Address Reservation

Choose menu "DHCP → Address Reservation", you can view and add a reserved address for
clients via the next screen (shown in Figure 4-50). When you specify a reserved IP address for a
PC on the LAN, that PC will always receive the same IP address each time when it accesses the
DHCP server. Reserved IP addresses should be assigned to the servers that require permanent
IP settings.
MAC Address - The MAC address of the PC for which you want to reserve an IP address.

Reserved IP Address - The IP address reserved for the PC by the Router.

Status - The status of this entry, either Enabled or Disabled.

To Reserve an IP address:
TL-WDR3500
Figure 4-49 DHCP Clients List
Figure 4-50 Address Reservation
- 61 -
N600 Wireless Dual Band Router