TP-Link TL-WDR3500 User Manual page 45

WPS Status - Enable or disable the WPS function here.

Current PIN - The current value of the Router's PIN is displayed here. The default PIN of the

Router can be found in the label or User Guide.
Restore PIN - Restore the PIN of the Router to its default.

Gen New PIN - Click this button, and then you can get a new random value for the Router's

PIN. You can ensure the network security by generating a new PIN.
Disable Router's PIN - If this box is checked, and then wireless clients will not be able to

connect to the wireless network with PIN code.
Add device - You can add a new device to the existing network manually by clicking this

button.
If the wireless adapter supports WPS, you can establish a wireless connection between wireless
adapter and Router using either Push Button Configuration (PBC) method or PIN method.

Note:
To build a successful connection by WPS, you should also do the corresponding configuration of
the new device for WPS function meanwhile.
I. Use the WPS Button
Use this method if your client device has a WPS button.
Step 1: Press the WPS/Reset button on the back panel of the Router, as shown in Figure 4-17.
You can also keep the default WPS status as Enabled and click the Add device button in
Figure 4-16. Then choose "Press the button of the new device in two minutes" and
click Connect, shown in Figure 4-18.
TL-WDR3500
Figure 4-16 WPS
- 35 -
N600 Wireless Dual Band Router