Wps - TP-Link TL-WDR3500 User Manual

Key type - This option should be chosen according to the AP's security configuration. It

is recommended that the security type is the same as your AP's security type
WEP Index - This option should be chosen if the key type is WEP(ASCII) or

WEP(HEX).It indicates the index of the WEP key.
Auth Type - This option should be chosen if the key type is WEP(ASCII) or

WEP(HEX).It indicates the authorization type of the Root AP.
Password - If the AP your Router is going to connect needs password, you need to fill

the password in this blank.
4.7.2

WPS

Choose menu "Wireless 5GHz →WPS", you can the screen as shown in Figure 4-31. This
section will guide you to add a new wireless device to an existing network quickly by WPS
function.
WPS Status - Enable or disable the WPS function here.

Current PIN - The current value of the Router's PIN is displayed here. The default PIN of the

Router can be found in the label or User Guide.
Restore PIN - Restore the PIN of the Router to its default.

Gen New PIN - Click this button, and then you can get a new random value for the Router's

PIN. You can ensure the network security by generating a new PIN.
Disable Router's PIN - If this box is checked, and then wireless clients will not be able to

connect to the wireless network with PIN code.
Add device - You can add a new device to the existing network manually by clicking this

button.
If the wireless adapter supports WPS, you can establish a wireless connection between wireless
adapter and Router using either Push Button Configuration (PBC) method or PIN method.
TL-WDR3500
Figure 4-31 WPS
- 47 -
N600 Wireless Dual Band Router