Grinder Maintenance - Saeco Primea Ring Operation And Maintenance Manual

10
Apply the grease evenly.

GRINDER MAINTENANCE

The grinder can be adjusted in order to create a fi ner grind after many grinder cycles (approximately 2000).
WARNING!
This operation should be carried out carefully and by an experienced user. The screw could fall into the
grinder; if this happens, remove it before restarting the machine. Protect the grinder hole with a cloth to
avoid this problem.
The snap is signalled by a message on the coffee bean hopper; refer to these messages when this
adjustment is performed.
EMPTY THE COFFEE BEAN HOPPER.
1
strong aroma
espresso coffee 08:33
Press and dispense two coffees.
4
Unscrew the screw that holds the
service door closed.
Then reposition the door and attach it with the previously removed screw.
11
Reassemble it by pressing the
PUSH! button.
2
out of coffee
espresso coffee 08:33
When the following screen appears,
press just once.
5
Remove screws and service door.
12
Close the service door and insert
the coffee grounds drawer.
3
Once the cycle has ended, turn
off the machine and unplug it.
6
Adjust until it clicks.
41