Beverage Dispensing; Espresso / Coffee / Long Coffee - Saeco Primea Ring Operation And Maintenance Manual

10

BEVERAGE DISPENSING

THE DISPENSING OF COFFEE, HOT WATER AND MILK MAY BE STOPPED AT ANY TIME
BY PRESSING THE
THE DISPENSED MILK MAY BE VERY HOT: DANGER OF SCALDING. AVOID TOUCHING
IT DIRECTLY WITH YOUR HANDS.
THE USED MILK HAS TO BE PROPERLY PRESERVED.
DO NOT USE IT AFTER THE BEST-BEFORE DATE SHOWN ON THE PACK AGE.
Check that all the containers are clean. To do this operation, follow the instructions in the "Cleaning and
Maintenance" chapter (see page 37)
WHEN YOU HAVE FINISHED PREPARING BEVERAGES CONTAINING MILK, PROCEED BY
CLEANING THE CONTAINER AND THE MACHINE'S CIRCUIT.
To brew 2 cups, the machine dispenses half of the entered quantity and briefl y interrupts dispensing in order
to grind the second serving of coffee. Coffee dispensing is then restarted and completed. If a milk beverage
has been chosen, the machine automatically manages milk dispensing.

ESPRESSO / COFFEE / LONG COFFEE

This procedure shows how to dispense an espresso. To dispense another type of coffee, select it by sliding
the click wheel with a fi nger. Use appropriate espresso or coffee cups so that the coffee will not overfl ow.
1
strong aroma
espresso coffee 08:33
Select the desired beverage by
navigating the click wheel with
your fi nger.
The machine ends dispensing automatically according to the quantity determined by the manufacturer. It is
possible to customize this quantity. See page 16.
KEY AGAIN.
2
strong aroma
espresso coffee 08:33
Select the coffee aroma by
pressing the key one or
more times.
3
brewing in progress
espresso coffee
Press the key once for 1
cup and twice for 2 cups. The
selected beverage will be brewed.