Adjustments; Coffee Intensitiy; Adjusting The Height Of The Drip Tray; Filling The Milk Container - Saeco Primea Ring Operation And Maintenance Manual

COFFEE INTENSITIY

The SBS system has been carefully designed to give your coffee the intense taste you desire. Simply
turn the dial and you will notice that the coffee goes from mild intensity to strong intensity.
SBS – SAECO BREWING SYSTEM
SBS adjusts the intensity of the brewed coffee,
and can even be adjusted while brewing. Any
adjustment has an immediate effect on the
brewing coffee.

ADJUSTING THE HEIGHT OF THE DRIP TRAY

Adjust the drip tray before dispensing any beverages.

FILLING THE MILK CONTAINER

The container with the cappuccinatore must be fi lled before preparing any milk beverage. Do not use
milk after the best-before date.
cappuccinatore on page 38).
1
Open the milk compartment by
pressing the button and remove
the milk container.
COFFEE
Height-adjustable drip tray.
To raise the drip tray, press lightly on the lower part of the button. To lower the tray,
press lightly on the upper part of the button; when the desired height is reached,
release the button.
Note: there is a red fl oater in the drip tray. When it rises, the tray must be emptied
and washed.
(Important! Refer to the instructions for maintenance and cleaning of the
2
Remove the cover and pour in the
milk. DO NOT EXCEED THE
MAXIMUM LEVEL shown in the
fi gure.

ADJUSTMENTS

MEDIUM
COFFEE
MILD STRONG S
C COFFEE
3
Replace the lid on the container
and place it back in the milk
compartment. Make sure to
carefully close the compartment.
9