STARTING THE MACHINE
Make sure that the main power button is not switched to the "ON" position.
1
Press the button on the coffee
hopper to open the cover. Fill the
hopper with coffee beans.
4
Fill the tank with fresh drinking
water. Do not exceed the "max"
level indicated on the water tank.
Once fi lled place the tank back
into the machine.
7
Press the main switch to the "On"
position.
2
Close the cover pushing it down
completely.
5
Attach the female end of the
power cord to the machine. Insert
the male end into the power
outlet.
BEFORE PERFORMING ANY OPERATION, COMPLETE
THE INSTALLATION (PAGES 6 – 7).
TO ADJUST THE WATER HARDNESS LEVEL AND SET
THE INTENZA AROMA SYSTEM SEE THE «WATER
HARDNESS MENU» ON PAGE 21.
INSTALLATION
3
Remove the water tank.
We recommend installing the
water fi lter (see page 7).
6
Place a container beneath the hot
water spout.
5