Setting The Illumination Colour; Setting The Fm Tuning Step; Using Auto Pi Seek For Preset Stations; Switching The Auxiliary Setting - Pioneer AVIC-F320BT Operation Manual

Customising preferences
Setting the illumination
colour
The illumination colour can be selected from
10 different colours. Furthermore, the illumina-
tion colour can be switched between these 10
colours in order.
Display the "Initial Setting" screen.
1
= For details, refer to Displaying the
"Initial Setting" screen on the previous
page.
Turn MULTI-CONTROL to select "RGB Il-
2
lumination".
3 Press MULTI-CONTROL left or right to
select the desired colour.
White (white) — Light Green (light green) —
Green (green) — Light Blue (light blue) —
Blue (blue) — Yellow (yellow) — Amber
(amber) — Red (red) — Scan (scan) — Cus-
tom (custom)
! Scan:
Shifts between the eight default colours in
sequence gradually.
! Custom:
Sets your created colour which is installed
from SD as the illumination colour.

Setting the FM tuning step

Normally the FM tuning step employed by
seek tuning is 50 kHz. When AF or TA is on,
the tuning step automatically changes to
100 kHz. It may be preferable to set the tuning
step to 50 kHz when AF is on.
Display the "Initial Setting" screen.
1
= For details, refer to Displaying the
"Initial Setting" screen on the previous
page.
Turn MULTI-CONTROL to select "FM
2
Step".
3 Press the centre of MULTI-CONTROL to
switch between "50kHz" and "100kHz".
p The tuning step remains at 50 kHz during
manual tuning.
Using Auto PI Seek for
preset stations
The navigation system can automatically
search for a different station with the same
programming, even during preset recall.
Display the "Initial Setting" screen.
1
= For details, refer to Displaying the
"Initial Setting" screen on the previous
page.
Turn MULTI-CONTROL to select "Auto
2
PI".
3 Press the centre of MULTI-CONTROL to
switch between "On" and "Off".

Switching the auxiliary setting

It is possible to use auxiliary equipment with
the navigation system as the one of sources.
Activate the auxiliary setting when using aux-
iliary equipment connected to the navigation
system.
Display the "Initial Setting" screen.
1
= For details, refer to Displaying the
"Initial Setting" screen on the previous
page.
Turn MULTI-CONTROL to select "AUX".
2
3 Press the centre of MULTI-CONTROL to
switch between "On" and "Off".
Chapter
22
115
Engb