Basic Operations Of The Audio Source; Switching The Audio Source; Turning Off The Audio Source - Pioneer AVIC-F320BT Operation Manual

Gps navigation audio system
Hide thumbs Also See for AVIC-F320BT:
Table of Contents

Advertisement

Basic operations of the audio source

This chapter describes the basic operations of
the audio source.
You can play or use the following sources with
the navigation system.
! TUNER (FM, MW/LW)
! CD
! ROM (MP3, AAC, WAV, WMA)
! USB
! iPod
! AUX (auxiliary device)

Switching the audio source

1
Press the MODE button when the map
of the current location is displayed.
The audio operation screen appears.
2
Press the SRC/OFF button repeatedly to
switch between the following sources.
TUNER (tuner) — CD (built-in CD player) —
USB (USB storage device) or iPod (iPod con-
nected using USB input) — AUX (auxiliary de-
vice)
p In the following cases, the sound source
cannot to be used:
! When a unit corresponding to each
source is not connected to the naviga-
tion system.
! When no disc is set in the navigation
system.
! When "AUX" in the "Initial Setting"
screen is set to "Off".
= For details, refer to Switching the aux-
iliary setting on page 115.

Turning off the audio source

% Press and hold the SRC/OFF button
until the audio source turns off.
The audio source is switched off.
p To return to the display of each source,
press the SRC/OFF button.
Chapter
15
77
Engb

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avic-f3210bt

Table of Contents