Checking The Current Itinerary; Editing Waypoints; Adding A Waypoint - Pioneer AVIC-F320BT Operation Manual

Checking and modifying the current route
Avoid Toll Road
This setting controls whether toll roads (in-
cluding toll areas) should be taken into ac-
count.
Off*:
Calculates a route that may include toll roads
(including toll areas).
On:
Calculates a route that avoids toll roads (in-
cluding toll areas).
p The system may calculate a route that in-
cludes toll roads even if "On" is selected.
Avoid Ferry
This setting controls whether ferry crossings
should be taken into account.
Off*:
Calculates a route that may include ferries.
On:
Calculates a route that avoids ferries.
p The system may calculate a route that in-
cludes ferries even if "On" is selected.
Avoid Motorway
This setting controls whether motorways may
be included in the route calculation.
Off*:
Calculates a route that may include motor-
ways.
On:
Calculates a route that avoids motorways.
p The system may calculate a route that in-
cludes motorways even if "On" is selected.
Time restrictions
This setting controls whether streets or
bridges that have traffic restrictions during a
certain time should be taken into account.
p If you want to set your route to avoid raised
draw bridges, select "On".
On*:
Calculates a route while avoiding streets or
bridges with traffic restrictions during a cer-
tain time.
Off:
Calculates a route while ignoring traffic re-
strictions.
p The system may calculate a route that in-
cludes streets or bridges that are subject to
traffic restrictions during a certain time
even if "On" is selected.
CAUTION
If the time difference is not set correctly, the navi-
gation system cannot consider traffic regulations
correctly. Set the time difference correctly (=
Refer to Setting the time difference on page
105).

Checking the current itinerary

You can check the route details.
Display the "Route info" screen.
1
= For details, refer to Displaying the "Route
info" screen on the previous page.
2 Touch [Profile].
The "Route Profile" screen appears.

Editing waypoints

You can edit waypoints (locations you want to
visit on the way to your destination) and recal-
culate the route so that it passes through
these locations.

Adding a waypoint

Up to 5 waypoints can be set, and waypoints
and final destination can be sorted automati-
cally or manually.
Chapter
09
45
Engb