Handling Guidelines; Discs And Player - Pioneer FH-X700BT Operation Manual

Additional information
Message Cause
ERROR-19 Communication
failed.
iPod failure.
ERROR-23 USB storage de-
vice was not for-
matted with
FAT12, FAT16 or
FAT32.
ERROR-16 The iPod firm-
ware version is
old.
iPod failure.
STOP There are no
songs in the cur-
rent list.
NOT FOUND No related
songs.
Action
Perform one of the
following opera-
tions.
–Turn the ignition
switch OFF and
back ON.
–Disconnect the
USB storage de-
vice.
–Change to a dif-
ferent source.
Then, return to the
USB source.
Disconnect the
cable from the
iPod. Once the
iPod's main menu
is displayed, recon-
nect the iPod and
reset it.
USB storage de-
vice should be for-
matted with FAT12,
FAT16 or FAT32.
Update the iPod
version.
Disconnect the
cable from the
iPod. Once the
iPod's main menu
is displayed, recon-
nect the iPod and
reset it.
Select a list that
contains songs.
Transfer songs to
the iPod.
Bluetooth device
Message Cause
ERROR-10
The power failed
for the Bluetooth
module of this
unit.

Handling guidelines

Discs and player

Use only discs that feature either of the following two
logos.
Use 12-cm discs. Do not use 8-cm discs or an adapter
for 8-cm discs.
Use only conventional, fully circular discs. Do not use
shaped discs.
Do not insert anything other than a CD into the CD
loading slot.
Do not use cracked, chipped, warped, or otherwise
damaged discs as they may damage the player.
Unfinalized CD-R/RW discs cannot be played back.
Do not touch the recorded surface of the discs.
Store discs in their cases when not in use.
Do not attach labels, write on or apply chemicals to
the surface of the discs.
Appendix
Action
Turn the ignition
switch OFF and
then to ACC or ON.
If the error mes-
sage is still dis-
played after
performing the
above action,
please contact
your dealer or an
authorized Pioneer
Service Station.
25
En