Mixtrax Menu; Switching The Dimmer Setting; Customizing The Illumination Color; About Mixtrax - Pioneer FH-X700BT Operation Manual

Section
Operating this unit
02
4 Turn M.C. to select the illumination
color.
You can select any one of the options in the
following list:
! FLASHING – The color selected from
KEY COLOUR flashes.
! FLASH MODE1 to FLASH MODE6 – The
system automatically cycles through all
available key colors for this unit. Select the
desired mode.
! OFF – No change in key color made when
incoming calls are received.

Switching the dimmer setting

You can adjust the brightness of illumination.
1 Press M.C. to display the main menu.
2 Turn M.C. to display ILLUMI and press
to select.
3 Turn M.C. to display DIMMER and press
to select the desired setting.
OFF (off)—ON (on)
! You can also change the dimmer setting by
pressing and holding
Customizing the
illumination color
You can create custom illumination colors for
both KEY COLOUR and DISP COLOUR.
1 Press M.C. to display the main menu.
2 Turn M.C. to display ILLUMI and press
to select.
3 Turn M.C. to display KEY COLOUR or
DISP COLOUR. Press to select.
4 Press M.C. and hold until the customiz-
ing illumination color setting appears in
the display.
20
En
/DIMMER.
5 Press M.C. to select the primary color.
R (red)—G (green)—B (blue)
6 Turn M.C. to adjust the brightness level.
Adjustment range: 0 to 60
# You cannot select a level below 20 for all three
of R (red), G (green), and B (blue) at the same
time.
# You can also perform the same operation on
other colors.
Note
You cannot create a custom illumination color
while SCAN, WARM, AMBIENT or CALM is
selected.

About MIXTRAX

MIXTRAX technology is used to insert a variety
of sound effects in between songs, allowing
you to experience your music as a nonstop
mix complete with visual and lighting effects.
Notes
! Depending on the file/song, sound effects
may not be added.
! MIXTRAX includes a MIXTRAX flashing color
mode that when switched on turns the flash-
ing colors on and off in time with the audio
track. If you find the feature distracting while
driving, please turn MIXTRAX off. Refer to Op-
erations using the MIXTRAX button on page
8.

MIXTRAX menu

1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select MIXTRAX.
3 Turn M.C. to select the MIXTRAX func-
tion.
Once selected, the following MIXTRAX func-
tions can be adjusted. The function is enabled
when MIXTRAX is on.