Selecting The Video Format; Setting The Video Signal - Pioneer AVH-X550BT Operation Manual

Section
System settings
18
4 Press the home button to switch to the
home display.
5 Touch the system key to open the sys-
tem menu.
6 Touch Auto EQ Measurement to enter
auto EQ measurement mode.
7 Plug the microphone into the micro-
phone input jack on this unit.
AVH-X5500BT
AVH-X3500DAB, AVH-X2500BTand AVH-
X1500DVD
Extension Cable
(Sold separately)
AUX input
(AUX)
8 Touch Start to start auto EQ.
9 When the 10-second countdown starts,
get out of the car and close the door within
10 seconds.
A measurement tone (noise) is emitted from
the speakers, and auto EQ measurement be-
gins.
When auto EQ is completed, The measure-
ment has finished. Please disconnect the
microphone and then push HOME key. is
displayed.
66
En
When the car's interior acoustic characteris-
tics cannot be measured correctly, an error
message will be displayed. (Refer to Under-
standing auto EQ error messages on page 80.)
# It takes about nine minutes for auto EQ mea-
surement to be completed when all the speakers
are connected.
# To stop auto EQ, touch Stop.
10 Store the microphone carefully in the
glove compartment or another safe place.
If the microphone is subjected to direct sun-
light for an extended period, high tempera-
tures may cause distortion, color change or
malfunction.

Selecting the video format

You can switch the video output format of V
OUT between NTSC and PAL.
1
home display.
Microphone
2
tem menu.
3
tem menu to select the video output for-
mat.
NTSC—PAL
Note
You can switch the video output format only for
the source from this unit.

Setting the video signal

When you connect this unit to an AV equip-
ment to this unit, select the suitable video sig-
nal setting.
! As this function is initially set to Auto, the
unit will automatically adjust the video sig-
nal setting.
! You can operate this function only for the
video signal input into the AV input.
Press the home button to switch to the
Touch the system key to open the sys-
Touch Video Output Format on the sys-