Storing And Recalling Stations; Listening To A Recent Broadcast (Time Shift); Selecting A Service Component - Pioneer AVH-X550BT Operation Manual

DAB (Digital Audio Broadcasting)
Basic operations
Switching preset channels using the buttons
1 Press c or d (TRK).
Seek tuning using the buttons
1 Press and hold c or d (TRK).
Manual tuning (step by step)
1 Touch the tuning keys.
Ensemble
Service
Primary Service Component
Service
Primary Service Component
Secondary Service Component
Secondary Service Component
Some individual services in an ensemble may be
further subdivided into Service Components. The
main Service Component is called the Primary Ser-
vice Component, and any auxiliary Service Compo-
nents are called Secondary Service Components.

Storing and recalling stations

You can easily store up to six stations for each
band as presets.
! Six stations for each band can be stored in
memory.
! Channels are stored and recalled on a
broadcast station basis.
1 Display the preset channel list screen.
Refer to Digital Audio Broadcasting tuner opera-
tions on the previous page.
The preset channel list appears in the display.
2 Touch and hold down one of the preset
tuning keys to store the selected frequency
to the memory.
The selected radio station frequency has been
stored in the memory.
3 Touch the appropriate preset tuning
key to select the desired station.
Listening to a recent
broadcast (time shift)
You can navigate through recent broadcasts
from the selected Service Component.
1 Touch Time Shift to switch to time shift
mode.
Touch Live to resume the live broadcast.
Touch . 2 Drag the scrubber bar on the screen to
adjust the playback point.
! Drag the scrubber to the left to skip back
! Drag the scrubber to the right to skip for-
This unit stores recent broadcasts to memory
Touch .
automatically. The memory capacity of this
unit will vary depending on the bit rate of the
Service Component used. The approximate
memory capacity is five minutes for 192 kbps.
Stored selections that are older than what can
be stored in the memory will not be available.
Pausing
You can use the pause function to temporarily
stop listening to a DAB.
1 Touch Time Shift to switch to time shift
mode.
2 Touch Pause and Play to pause playback
temporarily.
! If the duration that a selection is paused ex-
Selecting a Service
Component
You can select a Service Component from the
following service list.
1 Touch Search to switch to the service
list mode.
one minute.
ward one minute.
ceeds the length of the memory capacity,
playback will resume from the beginning of
the selection in memory.
Section
06
17
En