Dismounting The Start Number Plate; Installing The Start Number Plate; Dismounting The Front Fender; Installing The Front Fender - KTM 50 SX Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.13

Dismounting the start number plate

11.14

Installing the start number plate

11.15

Dismounting the front fender

11.16

Installing the front fender

–
Remove screw
–
Remove screw
C00050-10
–
Position the start number plate with the drill holes onto the holding lugs
fender.
C00058-10
–
Mount and tighten screw
Guideline
Remaining screws, chassis
–
Position the brake line. Put the clamp on, mount and tighten screw
C00052-10
–
Remove screws
601982-10
–
Position the fender with holding lugs
plate.
101938-10
and take off clamp.
1
. Remove the start number plate.
2
.
2
. Remove the front fender.
1
into the drill holes on the start number
1
M6 10 Nm (7.4 lbf ft)
3
33
of the
1
.