KTM 990 SUPERMOTO T EU Owner's Manual page 93

11 SERVICE WORK ON THE CHASSIS
–
Check the chain sliding guard for wear.
» If there is no gap between the chain and the upper edge of the screw:
–
Change the chain sliding guard.
–
Check the chain sliding guard for tightness.
» If the chain sliding guard is loose:
–
Tighten the chain sliding guard.
Guideline
Screw, chain sliding
C00363-01
guard
Screw, chain sliding
guard
–
Check the chain sliding piece for wear.
» If the drill hole becomes visible on the chain sliding piece in area
–
Change the chain sliding piece.
–
Check the chain sliding piece for tightness.
» If the chain sliding piece is loose:
–
Tighten the chain sliding piece.
Guideline
Screw, chain sliding piece
C00364-10
x
M5 5 Nm
(3.7 lbf ft)
M6 6 Nm
(4.4 lbf ft)
x
EJOT PT K60x20
91
–
Loctite ® 243™
:
C
2 Nm (1.5 lbf ft)