13
WHEELS, TIRES
–
Slide the sleeve onto the wheel speed sensor
Mount and tighten screw
Guideline
Screw, wheel speed sensor
–
Fasten the speed sensor cable in the bracket.
–
Position the brake calipers and check that the brake linings are seated correctly.
–
Mount screws
B00632-11
–
Operate the hand brake lever repeatedly until the brake lining presses up against the
brake disc and there is a pressure point. Fix the hand brake lever in its engaged posi-
tion.
The brake calipers straighten.
–
Tighten screws
Guideline
Screw, front brake caliper
–
Remove the fixation of the hand brake lever.
–
Take the motorcycle off of the front wheel stand. (
–
Take the motorcycle off of the rear wheel stand. (
.
4
M6
on both brake calipers but do not tighten yet.
5
on both brake calipers.
5
M10x1.25
and push them into the hole together.
3
6 Nm
Loctite
(4.4 lbf ft)
45 Nm
Loctite
(33.2 lbf ft)
p. 76)
p. 75)
108
®
243™
®
243™