KTM 990 SUPERMOTO T EU Owner's Manual page 173

18 CLEANING, CARE
Info
Use warm water containing normal motorcycle cleaner and a soft sponge. Never
apply motorcycle cleaner to a dry vehicle; always rinse the vehicle with water
first.
If the vehicle was operated in road salt, clean it with cold water. Warm water
would enhance the corrosive effects of salt.
–
After rinsing the motorcycle with a gentle spray of water, allow it to dry thoroughly.
–
Remove the closure of the exhaust system.
Warning
Danger of accidents Reduced braking efficiency due to a wet or dirty brake sys-
tem.
–
Clean or dry a dirty or wet brake system by riding and braking gently.
–
After cleaning, ride the vehicle a short distance until the engine warms up.
Info
The heat produced causes water at inaccessible locations in the engine and on
the brake system to evaporate.
–
After the motorcycle has cooled off, lubricate all moving parts and bearings.
–
Clean the chain. ( p. 84)
–
Treat bare metal parts (except for brake discs and exhaust system) with anti-corrosion
materials.
Cleaning and preserving materials for metal, rubber and plastic (
–
Treat all painted parts with a mild paint polish.
High-luster polish for paint ( p. 207)
171
p. 206)