KTM 990 SUPERMOTO T EU Owner's Manual page 112

13 WHEELS, TIRES
Main work
–
Remove screw
–
Remove nut
–
Pull out wheel spindle
with the adjusting screw.
B00626-11
–
Push the rear wheel forward as far as possible and take the chain off the rear sprocket.
–
Withdraw the wheel spindle.
–
Pull the rear wheel backward until the brake caliper support hangs free between the
brake disc and the wheel rim.
Warning
Danger of accidents Reduced braking efficiency due to damaged brake discs.
–
B00135-01
and pull wheel speed sensor
1
. Remove chain adjuster
3
to the point where the chain adjuster is no longer in contact
5
Always lay down the wheel in such a way that the brake discs are not dam-
aged.
out of the hole.
2
.
4
110