An Accessory Storage Drawer - GE Advantium PSB1200BB Installation Instructions Manual

Preparation
PREPARE THE OPENING (cont.)
Installation over a GE/Monogram oven:
30"
17-1/2"
• If you are replacing a GE/Monogram electric
double oven with the combined installation
of an Advantium 120V and a single oven, use
the dimensions shown. The middle rail separating
the two openings may need to be larger than
the 2" minimum shown.
Installation Preparation
WITHOUT
23-1/2"
Construct Solid
Bottom Min.
3/8" Plywood
Supported by
25-1/4"
2 x 4 or 2 x 2
Runners all
Four Sides
2 " Min.
(3 " Recommended)
Per Oven
Requirement

an Accessory Storage Drawer

PREPARE THE OPENING (cont.)
Installation over a GE/Monogram Oven and
Warming Drawer:
30"
17-1/2"
Per Warming
Drawer Requirement
NOTE: Additional clearances between the cutouts
may be required. Check to be sure the oven
supports above the Warming Drawer location
do not obstruct the required interior depth
and height. See Warming Drawer installation
instructions for details.
CAUTION:
mounting surface must be capable of supporting
the cabinet load, in addition to the added weight
of this approximate 80-pound oven, plus
additional oven loads of up to 50 pounds
or a total weight of 130 pounds.
6
23-1/2"
Construct Solid
Bottom Min.
3/8" Plywood
25-1/4" Supported by
2 x 4 or 2 x 2
Runners all
Four Sides
2 " Min.
(3 " Recommended)
Per Oven
Requirement
2 " Min.
(3 " Recommended)
For personal safety, the