Microtek ScanMaker i800 Plus Start Here Manual page 6

How to Scan: Scanning Photos and Film (cont.)
Scanning Positive or Negative Film
1. Select the film you wish to scan, then follow the procedures for positioning transparent films
detailed in the "Using the TMA" section of this guide.
2. Launch ScanWizard Pro.
3. If scanning positive film such as 35mm slides:
a) Go to the Preview window of ScanWizard Pro and from the Scan Material menu, choose
Positive / Positive Film.
b) Follow steps 4 to 7 of the procedures detailed in "Scanning Photos".
If scanning negatives:
a) Go to the Preview window of ScanWizard Pro and from the Scan Material menu, choose
Negative / Negative Film. The Negative Scan Settings window appears.
b) Go to the Negative Scan Settings window, choose the film brand, film type, and ISO settings
that match the film you use. For more details, refer to a PDF document called "ScanWizard
Pro Reference Manual" in your Microtek Software CD/DVD and see the Addendum to
ScanWizard Pro section.
c) Follow steps 4 to 7 of the procedures detailed in "Scanning Photos".
4. In the Scan Job Queue window, check the "Multiple Auto-crop for EZ-Lock Film Holder" option.
5. Click the Scan (or "Batch") button in the Preview window to start scanning.
Settings window
Preview window
6
Negative Scan Settings window
Scan Job Queue window