Programming Function Buttons - Fluke Ti40FT-20 User Manual

TiR2,TiR3,TiR4,Ti40,Ti45,Ti50,Ti55
Users Manual

Programming Function Buttons

You can assign any of the functions described in Table 2-3 to any one of three
programmable buttons: A, B, C (see Appendix F for a list of default
settings). See programming instructions on the next page.
Item
Centerpoint/Centerbox – Used to cycle the centerpoint on, then
centerpoint and centerbox on, then the centerpoint and centerbox
both off.
Zoom – Used to quickly cycle between 2x, 4x, 8x zoom, and normal
display settings (zoom options vary by camera model; see
Appendix D).
Brightness – Used to quickly cycle through the display screen
brightness settings: "Dim," "Normal," and "Bright." Each time you
press the function button, the next setting takes affect.
Annotation – Used to quickly access the image annotation editor
(available on TiR2, TiR4,Ti45 and Ti55 models only).
Browse Images – Used to immediately recall the last saved or last
viewed image.
Browse Thumbnails – Used to quickly browse thumbnails of
images stored on the CompactFlash memory card.
Palette Visible – Used to quickly cycle the color palette bar on or off
the display screen.
Marker Toolbar Visible – Used to show or hide the marker toolbar
for adding extra visible marker points or areas to the image and
displaying temperatures near them.
Torch – Used to quickly switch the LED light on or off (IR Fusion
models only). When on, light shines continuously to brighten up dark
work areas; light automatically times out after 60 seconds.
2-10
Table 2-3. Programmable Functions
Description