Fluke Ti40FT-20 User Manual page 36

TiR2,TiR3,TiR4,Ti40,Ti45,Ti50,Ti55
Users Manual
To avoid damaging the memory card or your camera, be
sure to insert the card properly. The card can be inserted
only one way; forcing it may damage your camera.
To insert a memory card:
1. Lift memory card slot cover.
2. Insert the SanDisk-brand CompactFlash memory card into the slot with
the card's connection end pointed at the camera and the label with MB
size facing the back of the camera.
If the camera is powered on, the message, "Compact Flash Card
inserted" is displayed.
To remove a memory card:
Camera can be on or off when removing a memory card.
To prevent data loss or corruption, do not remove the
memory card while saving an image.
1. Lift memory card slot cover.
2. Firmly press the memory card ejection button. The card partially slides out
of the slot.
3. Remove the memory card from the slot and close the cover.
2-14
WCaution
Note
Note
WCaution