Edimax EW-7416APn V2 Manual page 50

Config Mode
Start PBC
Start PIN
NOTE: When you're using PBC type WPS setup, you must press
'PBC' button (hardware or software) of wireless client within 120
seconds; if you didn't press PBC button of wireless client within
this time period, please press 'PBC' button (hardware or software)
of this range extender/access point again.
authentication mode of this range extender/access
point will be displayed here. If you don't enable
security function of the range extender/access
point before WPS is activated, the range
extender/access point will auto set the security to
WPA (AES) and generate a set of passphrase key
for WPS connection.
Passphrase Key: Displays the WPA passphrase
here, all characters will be replaced by asterisk for
security reason. If encryption is not set on this
range extender/access point, nothing will be
displayed here.
There are 'Registrar' and 'Enrollee' modes for the
WPS connection. When 'Registrar' is enabled, the
wireless clients will follow the range
extender/access point's wireless settings for WPS
connection. When 'Enrolle' mode is enabled, the
range extender/access point will follow the
wireless settings of wireless client for WPS
connection.
Click 'Start PBC' to start Push-Button style WPS
setup procedure. This range extender/access point
will wait for WPS requests from wireless clients for
2 minutes. The 'WLAN' LED on the range
extender/access point will be steady on for 2
minutes when this range extender/access point is
waiting for incoming WPS request.
Please input the PIN code of the wireless client
you via client wish to connect, and click 'Start PIN'
button. The 'WLAN' LED on the range
extender/access point will be steady on when this
range extender/access point is waiting for
incoming WPS request.
43