Edimax EW-7416APn V2 Manual page 44

MAIN ESSID
Multiple ESSID
Channel Number
Associated Clients
MAC address 1-4
Set Security
After you finish with setting, please click 'Apply', and the following
will be able to connect to this range
extender/access point.
If you select 2.4GHz (B+G), then only wireless
clients using 802.11b and 802.11g band will be
able to connect to this range extender/access point.
If you want to allow 802.11b, 802.11g, and 802.11
Draft-N clients to connect to this range
extender/access point, select 2.4GHz (B+G+N).
Please input the ESSID (the name used to identify
this wireless range extender/access point) here.
You can input up to 32 alphanumerical characters.
PLEASE NOTE
SENSITIVE.
The range extender/access point supports multiple
SSID function; up to four SSIDs can be set. If you
want to configure additional SSIDs, please click
this button. For detailed descriptions of the
function, please refer to Section 2-4-1-1.
Please select a channel number you wish to use.
The channel number must be same with another
wireless range extender/access point you wish to
connect
Click 'Show Active Clients' button and a new
popup window will appear which contains the
information about all wireless clients connected to
this range extender/access point. You can click
'Refresh' button in popup window to keep
information up-to-date.
Please input the MAC address of the wireless
range extender/access point you wish to connect
Click this button to select an encryption mode for
this wireless link, a new popup window will
appear. Please refer to Section 2-7 for detailed
descriptions.
37
THAT ESSID IS CASE