Edimax EW-7416APn V2 Manual page 39

Here are descriptions of every setup item:
Band
Channel Number
MAC address 1
Set Security
Please select the wireless band you wish to use. By
selecting different band setting, you'll be able to
allow or deny the wireless client of a certain band.
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz
(G), only wireless clients using the wireless band
you select (802.11b, 802.11 Draft-N, or 802.11g)
will be able to connect to this range
extender/access point.
If you select 2.4GHz (B+G), then only wireless
clients using 802.11b and 802.11g band will be
able to connect to this range extender/access point.
If you want to allow 802.11b, 802.11g, and 802.11
Draft-N clients to connect to this range
extender/access point, select 2.4GHz (B+G+N).
Please select a channel number you wish to use.
The channel number must be same with another
wireless range extender/access point you wish to
connect
Please input the MAC address of the wireless
range extender/access point you wish to connect
Click this button to select an encryption mode for
this wireless link, a new popup window will
32