Edimax EW-7416APn V2 Manual page 46

Here are descriptions of every setup item:
Band
MAIN SSID
Multiple ESSID
Channel Number
Associated Clients
Please select the wireless band you wish to use. By
selecting different band setting, you'll be able to
allow or deny the wireless client of a certain band.
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz
(G), only wireless clients using the wireless band
you select (802.11b, 802.11 Draft-N, or 802.11g)
will be able to connect to this range
extender/access point.
If you select 2.4GHz (B+G), then only wireless
clients using 802.11b and 802.11g band will be
able to connect to this range extender/access point.
If you want to allow 802.11b, 802.11g, and 802.11
Draft-N clients to connect to this range
extender/access point, select 2.4GHz (B+G+N).
Please input the ESSID (the name used to identify
this wireless range extender/access point) here.
You can input up to 32 alphanumerical characters.
PLEASE NOTE
SENSITIVE.
The range extender/access point supports multiple
SSID function; up to four SSIDs can be set. If you
want to configure additional SSIDs, please click
this button. For detailed descriptions of the
function, please refer to Section 2-4-1-1.
Please select a channel number you wish to use.
The channel number must be same with another
wireless range extender/access point you wish to
connect
Click 'Show Active Clients' button and a new
popup window will appear which contains the
information about all wireless clients connected to
this range extender/access point. You can click
39
THAT ESSID IS CASE